Laser Honing
Reduction of friction and wear by combining honing and laser structuring
China
- International
- EN
- DE
- USA
- EN
- China
- 中国
- EN
The combination of Structuring and honing
Rising customer expectations and future exhaust and emissions laws place extensive requirements on the oil and fuel consumption of gaseoline and diesel engines. The laser honing developed by Gehring has become an international standard. For both diesel and gaseoline engines, the laser structuring of the cylinder is currently applied in the range of the upper piston reversal point.
The combination of laser structuring and honing of cylinder bore surfaces is known as laser honing.
Principles of laser honing
The combined honing and laser structuring of cylinder bore surfaces is considered laser honing. During this process the engine block first undergoes the conventional rough and intermediate honing step in order to achieve the desired base profile for the laser structuring. Microscopic pockets, the engine-specific laser structure, are created into the cylinder bore surface by means of a laser beam. The subsequent final steps, deburring and finish honing, remove the melt protrusions arising from the laser processing to create an extremely fine surface.
Objective of laser honing
In principle, the frictional forces in the tribological system consiting of piston ring and cylinder bore are to be reduced.
As a contribution to the future viability of internal combustion engines, laser honing provides an opportunity to improve exhaust emissions so that the future exhaust limits such as Euro 5 and Euro 6 are easier to achieve.
Your benefits
The advantages of laser honing have been proven in dynamometer and fleet tests as well as in numerous series applications. Due to the smooth cylinder bore surface and the superimposed micropocket structure the tribological system of piston ring - cylinder bore offers numerous customer advantages:
- Reduction in oil consumption
- Improvement in emissions
- Reduction in friction
- Reduction in wear