Standard Honing Stone

Gehring Diato Standard Honing Stone

With regard to our current ecological and economic challenges, we are convinced: Honing with diamond or boron nitride abrasives is indispensable in modern production processes.

Numerous factors determine the honing result. Only with the ideal composition of the honing stone and the perfect process-orientated coordination of the single parameters, can ideal results be achieved.
Hereby, high production quality, short cycle times and longevity of the respective tools are achieved. Our specialists have had many years of practical experience in the entire field of honing technology. We can therefore ensure to define the ideal honing stones for our customers anytime.

We are able to define the ideal honing stones both for Gehring tools, and for tools from other manufacturers.

Further to Technological Advice

Further to Abrasive Development

Standard Honing Stone

The abrasive layer is produced with a steel blank and the honing stone is soldered or bonded onto the stone holder of the tool.
How to order: W x H x L x Y
Example: 5.00 x 6.00 x 100.00 x 2.0

Slotted Standard Honing Stone

The same structure as for the standard honing stone only with longitudinally slotted abrasive.
How to order: W x H x L x Y x S
Example: 6.00 x 6.00 x 80.00 x 2.5 S 2.0

Standard Honing Stone Type T

Stone with T-shaped profile with a narrow reduced section and a short wide work element in the lower area.
How to order: W x H x L x Y G x L'
Example: 3.00 x 3.00 x 45.00 x 2.0 G 7.5

Standard/Compact or Solid Honing Stone Type G

Honing stone with systematically arranged upper and lower guide.
How to order: W x H x L x Y G x L'
Example: 3.00 x 3.00 x 45.00 x 2.0 G 7.5